Home

About us

Products

Events

Contacts

Publications

2021

  •   A.V. Sokolov, V.P. Galitsyn, S.I. Shkurenko, P.М. Pakhomov. Solvent purification in technology of obtaining UHMWPE fibers by gel molding. // Khimicheskie volokna. 2021. № 1, p. 3-7
  •   А.V. Genis, А.V. Kuznetsov, Yu.P. Nekrasov. Comparative analysis of sorption-active fillers and methods of their introduction into the polymer matrix in the process of forming fibrous composite materials by a solution aerodynamic method. // Plasticheskiye massy. 2021. № 1-2, p. 38-43
  •   А.I. Markova, A.V. Sokolov, V.P. Galitsyn, S.D. Khizhnyak, Е. Ruehl, P.М. Pakhomov. Analysis of quality of the solvent used in gel-forming of UHMWPE by optical spectroscopy methods. // Tver. Bulletin of Tver State University. Series: Chemistry. № 1 (143). 2021, p. 87-93
  •   A.V. Genis, А.V. Kuznetsov G.М. Iliutkina, М.М. Smirnov. Investigation of the mechanisms of toxic chemicals penetration through a multilayer composite sorption-active material. // Plasticheskie massy 2021. № 9-10, p.48-51


2020

  • Yu.A. Vinogradov. Dynamic investigation of polymer systems in viscoelastic state with polymer concentration above the critical one // Khimicheskie volokna. 2020. № 2, p. 8-15
  • S.I. Shkurenko, V.P. Galitsyn, A.V. Sokolov, S.V. Zaikin. Prospects for creation of pilot production of extra-high-strength UHMWPE fibers for armored composites and other products in Russia. // XVII All-Russian Scientific and Practical Conference. Proceedings. 2020, p. 15-17
  • P.М. Pakhomov, A.V. Sokolov, S.D. Khizhnyak, V.P. Galitsyn. Effect of porosity on mechanical characteristics of UHMWPE fibers obtained by gel molding. // Khimicheskie volokna. 2020. № 5, p.37-42
  • P.М. Pakhomov, A.V. Sokolov, S.D. Khizhnyak, V.V. Zhizhenkov, N.G. Kvachadze, V.P. Galitsyn, А.Е. Chmel. Residual solvent in highly oriented fibers made of UHMWPE. // Vysokomolekulyarnie soedineniya (High-molecular weight compounds). Series А. 2020. V. 62. №2, p. 156-160
  • G.G. Arakelov, К.S. Smirnova, А.G. Nichvolodin, S.D. Khizhnyak, А.V. Sokolov, P.М. Pakhomov. Composite films based on polyvinyl alcohol and Na-carboxymethyl cellulose for separation purposes. // Journal of Applied Chemistry. 2020. V. 93. Issue 6, p. 111-116
  • A.V. Sokolov, R.V. Korolyov, К.S. Murikhin, S.D. Khizhnyak, V.P. Galitsyn, P.М. Pakhomov. Determination of turbidity index of waste vaseline oil by turbidimetric method. // Tver. Bulletin of Tver State University. Series: Chemistry № 2 (40). 2020, p. 107-112
  • S.I. Shkurenko, К.V. Diesperov. Continuing the conversation on the topic: "Progress and ecology - friends or enemies?" // XVII All-Russian Scientific and Practical Conference. Proceedings. 2020,        p. 108-111

2019

  • A.V. Genis, A.V. Kuznetsov. Promising inventions in production of fibrous polymer sorbents. // Rossiyskiy khimicheskiy journal(Journal of the Russian chemical society named after D.I. Mendeleyev). 2019. № 1, Volume LXIII. p. 27-54
  • Yu.A. Vinogradov. Investigation of dynamic deformation of polymer systems in viscoelastic state. // Khimicheskie volokna. 2019. № 2, p. 3-8
  • S.I. Shkurenko, V.P. Galitsyn, Е.А. Rо, А.V. Sokolov, S.V. Zaikin. State of development and properties of domestic UHMWPE fibers and composites on their base. // XVI All-Russian Scientific and Practical Conference. Proceedings. 2019, p. 29-31
  • А.V. Sokolov, R.V. Korolyov, К.S. Murikhin, S.D. Khizhnyak, V.P. Galitsyn, P.М. Pakhomov. Effect of the residual solvent on mechanical properties of ultrahigh-molecular-weight polyethylene fibers produced by gel molding. // Khimicheskie volokna. 2019. № 5, p. 53-55
  • А.V. Sokolov, R.V. Korolyov, К.S. Murikhin, S.D. Khizhnyak, V.P. Galitsyn, P.М. Pakhomov. About products of degradation in production of ultrahigh-molecular-weight polyethylene fibers by gel molding. // Khimicheskie volokna. 2019, № 6, p. 3-5
  • А.V. Sokolov, R.V. Korolyov, К.S. Murikhin, S.D. Khizhnyak, V.P. Galitsyn, P.М. Pakhomov. Study of the kinetics of thermal oxidative degradation of vaseline oil by IR spectroscopy. // Tver. Bulletin of Tver State University. Series: Chemistry. № 1. 2019, p. 99-105
  • О.P. Petrova, Е.А. Brovina, R.А. Molchanova, Т.I. Samsonovа, А.V. Sokolov, P.М. Pakhomov. On the issue of evaluating the quality of vaseline oil on a color scale. // Tver. Bulletin of Tver State University. Series: Chemistry. № 2. 2019, p. 127-135
  • Е.А. Belyaeva, А.N. Trophimov, А.F. Коsolapov, S.I. Shkurenko, V.P. Galitsyn и other. Layered organocomposites and hybrid composites of multifunctional purpose based on UHMWPE fibers. // XVI All-Russian Scientific and Practical Conference. Proceedings. 2019, p. 47-50

2018

  • А.V. Genis, R.К. Idiatulov, M.A. Yarmak, S.E. Yermolayev, A.A. Sindeyev. Installation for production of filter-sorption nonwovens with improved properties from polymer solutions by aerodynamic molding // Patent of RF № 2668446. 01.10.2018.
  • Yu.A. Vinogradov, N.I. Kuzmin, T.I. Samsonova. On the density of polymer systems during deformation // Proceedings of the 29th Symposium on rheology. Tver. 23-29 September 2018, p. 68-69
  • А.V. Genis, А.V. Kuznetsov. Promising developments in production of fibrous polymer sorbents for modern personal protective equipment. // Book of reports of the scientific and practical conference with international participation. Technologies of human life support and technosphere safety. Tambov, 2018.
  • А.V. Kuznetsov, А.V. Genis, N.A. Strazhnikova, R.К. Idiatulov, Yu.P. Nekrasov. The influence of nature and particle size of the fillers on rheological properties of the slurries for molding of carbon-filled materials by aerodynamic method // Khimicheskie volokna. 2018, №5
  • О.P. Petrova, Е.А. Brovina, И.S. Rebetskaya, Т.I. Samsonova, А.V. Sokolov, P.М. Pakhomov. Spectrophotometric method for determining the chromaticity of vaseline oil when using a chromium-cobalt color scale. // Tver. Bulletin of Tver State University. Series: Chemistry. № 1. 2018, p. 7-13
  • А.V. Sokolov, Ye.E. Alekseyev, S.D. Khizhnyak, V.P. Galitsyn, P.М. Pakhomov. About the  thermooxidative destruction of solvent in production of high-strength UHMWPE fibers by gel molding. // Khimicheskie volokna. № 4, 2018, p. 18-21
  • P.М. Pakhomov, S.D. Khizhnyak, I.N. Mezheumov, V.P. Galitsyn. Production of high-strength fibers from ultra-high molecular weight polyethylene.// Journal of general chemistry. 2017. V. 87. № 6, P. 1337-1350.

2017

  • V.P. Galitsyn, S.I. Shkurenko, E.F. Kharchenko. Extra strong UHMWPE yarns and strategically important products based on them. // XV International Scientific and Practical Conference. Thesis of reports. 2017, p. 29-30
  • А.V. Genis, А.V. Kuznetsov. Development of technology for production of new types of fibrous filter-sorption composite materials for modern personal protective equipment. // IV International Forum of light industry. Book of reports. 2017,  p. 75-79
  • А.V. Genis, А.V. Kuznetsov. New types of fibrous filter-sorption composite materials for modern personal protective equipment. // Polimernye Materialy. 2017. №4, p. 48-52
  • А.V. Genis, А.V. Kuznetsov. Fibrous polymer sorbents. // Plastics. 2017. №5 (167), p. 14-19
  • А.V. Genis, А.V. Kuznetsov. Promising fibrous polymer sorbents. // Plastics. 2017. №6 (168), p. 19-25
  • P.М. Pakhomov, V.P. Galitsyn, S.D. Khizhnyak, А.Е. Chmel. Experience of studying the oriented structures of polyethylene when using a long-wave acoustic mode in the spectrum of combination scattering. // Vysokomolekulyarnie soedineniya (High-molecular weight compounds). 2017. V. 59 А. № 4, p. 378-390

2016

  • А.V. Kuznetsov, А.V. Genis. Influence of grain-size composition of activated carbon filler on operational properties of fibrous composite materials // Scientific and technical book "Questions of defence engineering» // Series 15. Composite non-metallic materials in mechanical engineering // 2016, №2, p. 116-123.
  • А.V. Genis, А.V. Kuznetsov, G.М. Ilyutkina, L.V. Polyakov. Optimization of technological process for production of combined filter-sorption composite materials // Plasticheskie massy. 2016,    №7-8, p. 56-61.
  • А.V. Genis, А.V. Kuznetsov. Interrelation of the filler activity and the structure of polymer matrix  of fibrous composite // Plasticheskie massy. 2016, №11-12, p. 27-32.
  • Yu.A. Vinogradov. Rheological analysis of chemical fiber spinning // Fibre Chemistry (Journal). 2016, 48 (2), p. 95-103. DOI 10.1007/s 10692-016-9749-7.
  • Yu.A. Vinogradov. Effect of precipitation-bath concentration on rheological properties of polymer system by wet spinning of fibers // Fibre Chemistry (Journal). 2016, 48 (4), p.263-270. DOI 10.1007/s 10692-017-9781-2.
  • Yu.A. Vinogradov, N.I. Kuzmin, Yu.S. Koval. Use of rheological characteristics of viscoelastic polymer systems to optimize the fiber spinning process // Khimicheskie volokna. 2016, № 5, p. 5-15.
  • Yu.A. Vinogradov. Use of rheological characteristics of viscoelastic polymer systems to optimize the fiber spinning process // Fibre Chemistry (Journal). 2016, 48 (5), p.363-370. DOI 10.1007/s 10692-017-9799-5.

2015

  • А.V. Genis. Analysis of the world and Russian polypropylene markets and the main areas of its consumption // Russian chemical journal (journal of the Russian chemical society named after D. I. Mendeleyev). 2015, № 4, volume LIX, p. 3-17
  • А.V. Kuznetsov, А.V. Genis, R.К. Idiatulov, Yu.P. Nekrasov. Production of composite nonwovens with minimum fiber diameter // Khimicheskie volokna. 2015, № 1, p. 34-39
  • Е.М. Mokhov, S.I. Shkurenko, Е.V. Monakhova, V.Е. Rykalina, А.N. Sergeyev, А.V. Malysheva, D.V. Borovikov. Study of antimicrobial properties of new types of biologically active surgical suture materials in vitro // Uspensky’ reading. Issue 8. Proceedings of the scientific and practical conference of the Russian doctors with international participation, dedicated to the 60th anniversary of the Department of General Surgery of Tver State Medical University. Tver 2015, p. 124.
  • V.I. Kernitsky, N.А. Zhir. Biopolymers are a supplement, not an alternative // Tverdye bytovye otkhody (Journal). 2015, №1.
  • V.I. Kernitsky, N.А. Zhir. Biopolymers are a supplement, not an alternative // Polimernye materialy. 2015, №2, p. 28-34
  • V.I. Kernitsky, N.А. Zhir. Recycling of polyethylene terephthalate waste // Tverdye bytovye otkhody (Journal). 2015, №5, p. 17-23
  • V.I. Kernitsky, N.А. Zhir. Recycling of polyethylene terephthalate waste (continuation) // Tverdye bytovye otkhody (Journal). 2015, №6, p. 24-27
  • N.А. Zhir, V.I. Kernitsky. Classification of polyethylene terephthalate waste and principal directions of their processing into modern materials and goods. Collection "New polymer composite materials"// Proceedings of the 11th international scientific and practical conference. Nalchik 2015, p. 107-111
  • V.I. Kernitsky, N.А. Zhir. Polyethylene terephthalate (PET) waste and promising directions of its processing // News of Kabardino-Balkarian State University. 2015.
  • V.I. Kernitsky, N.А. Zhir., А.К. Mikitayev. PET: ordered to survive // Plastics. 2015, №12 (152),  p. 32-38
    V.I. Kernitsky. Polyethylene terephthalate (PET) in Russia: realities and prospects // Bulletin of chemical industry. 2015, №6 (87), p. 50-52
  • V.I. Kernitsky, А.К. Mikitayev // Production and processing of polyethylene terephthalate. - М.: Publishing house of the Russian University of Сhemical Technology named after D.I. Mendeleyev. 2015. – p. 282 . - ISBN 978-5-7237- 1229-4.

2014

  • Yu.A. Vinogradov, N.I. Kuzmin. A new look at the theory of dynamic deformation of polymer in viscoelastic state. Proceedings of the 27th Symposium on rheology. Tver. 08-13 September 2014, p. 54-56.
  • А.V. Kuznetsov, A.V. Genis. Research of PAN precursor thermostabilization process in  technology of carbon fibres production // Scientific and technical book “Questions of defense engineering”. Series 15 (Composite non-metallic materials in engineering). 2014, №3 (174), p. 24
  • V.I .Kernitsky. This pure and transparent PET // Chemistry and business. 2014, journal №1. p.56-57
  • V.I. Kernitsky. The market of PET: factors of influence and new capacities // Information-analytical newspaper PLASTINFO. 2014, № 2-2/92, p. 6 
  • O. Golovnev, V. Kernitsky. Plans for a bottle // Expert. 2014, journal № 4 (833), p. 9
  • A.V. Genis, N. A. Strazhnikova. World market of PP: current state and prospects // Plastics. 2014, №7 (136), p. 38-42
  • V.I. Kernitsky, N.A. Zhir. Processing of Polyethylene Terephthalate waste  // Polimernye Materialy. 2014, №8, p.11-21
  • А.V. Kuznetsov, A.V. Genis. Yu.S. Koval. Change of structural-mechanical properties of PAN precursor in the process of its transformation into carbon fibres // Scientific and technical book “Questions of defense engineering”. Series 15. Composite non-metallic materials in engineering. 2014, №4 (175), p. 18-22

2013

  • Pakhomov P., Khizhnyak S., Jehnichen D., Hofmann T., Galitsyn V., Tshmel A. Recrystallization in isometrically heated gel-spun polyethylene fibers // Physics and chemistry of polymers. Issue 19. Tver 2013, p. 3-10
  • А.А. Podushkina, I.N. Mezheumov, S.D. Khizhnyak, A. I. Ivanova, R.М. Grechishkin, V.P. Galitsyn, P.M. Pakhomov. Study of influence of pressure on compaction of UHMWPE reactor powders // Physics and chemistry of polymers. Issue 19. Tver 2013, p. 75-80
  • V.P. Galitsyn, N.I. Kuzmin, S.I. Shkurenko, B.V. Baidakov, A.E. Tshmel,   P.M. Pakhomov. About the structure of disordered phase of UHMWPE physical gel // Khimicheskiye Volokna. Journal № 4, 2013, p. 9-14
  • B.V. Baidakov, V. I. Natrusov, T.E. Shatskaya, S.I. Shkurenko, V.P. Galitsyn.          Light structural composite reinforced by UHMWPE high-strength yarns // Pilotless aircraft. Special edition INTERPOLYTEX – UYS – TECH, 2013, p. 25-26
  • P.M. Pakhomov, S.D. Khizhnyak, V.P. Galitsyn, D. Jehnichen, T. Hofmann, A.E. Tshmel. Evolution of intercrystalline “bridges” at multistage pulling of polyethylene fibres produced through gel-spinning //Khimicheskiye Volokna. Journal № 6, 2013, p. 15-21
  • A.V. Genis, B.V. Baidakov, V.P. Kukhar, N.A. Strazhnikova, T.M. Iliyutkina. The role of lubricants in modern processes of chemical fibres and filled polymeric materials production // Plasticheskiye massy. Journal №3, 2013, p. 24-29
  • A.V. Genis, B.V. Baidakov, Yu.P. Nekrasov, R.K. Idiatulov, А.А. Sindeyev, G.S. Kabanova. Study of sorption properties of the filled nonwoven materials // Plasticheskiye massy. Journal №5, 2013, p. 20-22
  • A.V. Kuznetsov, A.V. Genis. Optimization of PAN fibres thermostabilization process via thermomechanical analysis (ТМА). Technologies and management: problems, ideas, innovations: Proceedings of International Research & Practice Conference. Tver 2013, p.104-107
  • V.G. Oros, A.V. Genis, Yu.P. Nekrasov. Production of carbon-filled nonwoven materials with improved properties // Technologies and management: problems, ideas, innovations: Proceedings of International Research & Practice Conference. Tver 2013, p.110-113
  • О.А. Baranova, T.I. Podolskaya, T.I. Samsonova, E.A. Brovina. Identification of lactic acid and its oligomers in lactide // Physics and chemistry of polymers. Issue 19. Tver 2013, p. 325-330
  • T.I. Samsonova, О.А. Baranova, T.I. Podolskaya, E.A. Brovina, D.V. Borovikov. Study of relationship between quantitative composition of low-molecular compound in lactide and storage conditions // Physics and chemistry of polymers. Issue 19. Tver 2013, p. 331-336
  • S.I. Shkurenko, E.V. Monakhova, B.V. Baydakov, A.G. Petrov, A.A. Boldyrev, A.N. Sosin. Polymers from natural renewable raw materials // Plasticheskiye massy. Journal №11, 2013, p. 36-41
  • V.I. Kernitsky. What about seven-year-old CHATEAU in a plastic bottle? // Kommersant-Dengi. 2013, journal № 47 (955), p. 76
  • V.I. Kernitsky. Polyethylene terephthalate (PET) - continuous development of technologies, diversification of application areas and new trends. Volume “New polymeric composite materials” // Materials of 9th International research-to-practice conference. Nalchik 2013, p. 97-100
     

2012

  • A.V. Genis, B.V. Baidakov, А.А. Sindeyev, L.N. Andrianova, R.К.Idiatulov.
    Assessment of sorption properties of polypropylene nonwoven materials used for petroleum spills collection. “Netkanye materialy“ Journal № 3, 2012, p.24-28.
  • V.P. Galitsyn, V.А. Zakharov, T.B. Mikenas, V.Е. Nikitina, P.M. Pakhomov, S.D. Khizhnyak, B. Hartman, А.Е. Tshmel. Optimization of UHMWPE synthesis for production of high-strength fibres from spinning solution. “Khimicheskiye Volokna” Journal № 5, 2012, p.3-6.
  • V.Е. Sitnikova, А.А. Kotova, V.P. Galitsyn, S.D. Khizhnyak, P.M. Pakhomov. The influence of morphologies of UHMWPE reactor powders on the property of strengthening of fiber produced by using gel technology. “Physics and chemistry of polymers”. Collection of scientific papers of Tver State University, Tver 2012, Issue 18, p.28-36.
  • V.Е. Sitnikova, А.А. Kotova, V.P. Galitsyn, S.D. Khizhnyak, P.M. Pakhomov. The influence of morphologies of UHMWPE reactor powders on spinning and orientation stretching of fibers produced through the gel state. “Khimicheskiye Volokna” Journal № 6, 2012, p. 3-7.
  • P.M. Pakhomov, S.D. Khizhnyak, Е.А. Rogova, V.P. Galitsyn, D. Jehnichen, T. Hofmann, V. Kulich, А.Е. Tshmel. Structure of crystal phase in gel-polyethylene and its influence on orientation of gel-fibers. “Vysokomolekulyarnye soyedineniya” Journal 2012, V. 54А, № 6, p. 1-6.
  • L.N. Andrianova, A.V. Genis, B.V. Baidakov, А.А. Sindeyev. Basic principles of production of PP nonwoven materials with high sorption properties by the method of aerodynamic spinning. Proceedings of the 1st Interregional Research & Practice Conference of Moscow State University of Technology and Management, Tver branch. 2012, p. 53-57.
  • Е.М. Mokhov, S.I. Shkurenko, Е.V. Monakhova, S. I. Sergeyeva, V.Е. Rykalina, А.N. Sergeyev, А.V. Zherebchenko. Phases of development of new antimicrobial sutures. Proceedings of the Research & Practice Conference of Doctors with international participation. Tver Regional Hospital. Uspensky reading. Issue 7, p.35-36.
  • Е.М. Mokhov, А.N. Sergeyev, S.I. Shkurenko, Е.V. Monakhova, V.Е. Rykalina, N.А. Loginova. About a new biologically active suture of combined effect. The 3th International Conference “Up-to-date technologies and possibilities of reconstructive and aesthetic surgery», Moscow 2012, Theses, p.228-230.
  • S.I. Shkurenko, Е.V. Monakhova, V.Е. Rykalina, Т.V. Bodyakovaа, Е.М. Mokhov, А.N. Sergeyev, I.V. Alexandrov. Development of biologically active sutures of a new generation. The 3th International Conference “Up-to-date technologies and possibilities of reconstructive and aesthetic surgery», Moscow 2012, Theses, p.227-228.
  • О.А. Baranova, K. Graff, E. Ruehl, S.D. Khizhnyak, P.M. Pakhomov. Supramolecular hydrogel of medical application with silver nanoparticles. “Physics and chemistry of polymers: Synthesis, properties and application”. Collection of scientific papers, Tver 2012.
  • О.А. Baranova, P.M. Pakhomov. Supramolecular hydrogel of medical application with silver nanoparticles. ХVI Symposium on molecular interactions and conformations. Theses, Ivanovo 2012, June, р.17-22.
  • Olga Baranova. Studies of structures in supramolecular hydrogel based on L-cysteine and silver. The Conference “Scienсe and Progress”, Berlin 2012, May, Theses, p.14-18.

2011

  • N.N. Machalaba, A.V. Genis. Status and prospects of scientific and industrial activity of FGUP "VNIISV". Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 3-10.
  • G.N. Yakushenok, A.V. Genis, N.N. Machalaba, A.A. Fetisova. Current status and prospects of the global market of chemical fibers and yarns. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 11-17.
  • T.A. Chudinskaya, K. V. Nikiforova , G.A. Smirnova, R.A. Molchanova, T.I. Samsonova. The toxicological and hygienic evaluation of synthetic fiber production and products as a necessary factor of occupational safety. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 17- 21.
  • V.Z. Volkov, A.P. Neverov, Yu.V. Valetkin. On the relationship between manufacturing accuracy of the spinnerets holes and uniformity polyacrylonitrile yarn. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 21-24.
  • A.V. Genis, A.A. Sindeyev, L.N. Andrianova. The properties of fibrous polypropylene melt-blown material used for petroleum spill collection. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 25-29.
  • V.P. Galitsin, E.A. Ro, Yu.S. Koval, A.V. Genis, N.N. Machalaba, P.M. Pakhomov, S.D. Khizhnyak, A.E. Chmel, E.M.Antipov. Changing the structure of polyethylene gel-spun fiber in the process of orientational stretching. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 30-36.
  • Yu.I. Mitchenko, A.N. Djachkov, L.D. Rudneva. Making of high-strength fibers from HMW polyvinyl alcohol using gel technology. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 36-41.
  • Yu.S. Koval. The solution of the issue on the shape and tension of the yarn in its spatial arrangement of the balloon under twisting. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 41-52.
  • T.I Samsonova, T.I. Podolskaya, O.P. Petrova, I.S. Rebetskaya, V.E. Rykalina. The preparation of synthetic fiber materials that contain biologically active substances for the determination of germanium using spectrophotometry. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 52-56.
  • V.E. Rykalina, S.I. Shkurenko, E.V. Monakhova, A.V. Genis, T.V. Bodyakova, E.M. Mokhov, A.N. Sergeyev. The improvement of functional properties of surgical sutures by means of surface modification by polymeric compounds. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 57-62.
  • R.K. Idiatulov, Yu.P. Nekrasov, A.V. Genis, T.I. Samsonova, L.V. Polyakov, G.S. Kabanova, I.F. Babich. The influence of elastomeric additives on production and properties of the filled fibrous materials, spun from polymer solutions. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 63-66.
  • V.I. Isayeva, Yu.M. Bazarov, L.N. Mizerovsky, E.Yu. Zakharov, A.S. Kolobkov. The low-temperature hydrolytic polymerization of caprolactam. Synthesis and processing of pilot batches of the polymer into multifilament yarn. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 67-71.
  • A.P. Andronova, S.I. Popryadukhina, I.A. Yegorov, N.B. Aleshicheva. Dyeing of polyester fibers using the method of crazing. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 71-74.
  • O.A. Baranova, N.I. Kuzmin, T.I. Samsonova, I.S. Rebetskaya, O.P. Petrova, P.M. Pakhomov, S.D. Khizhnyak, P.V. Komarov, M.M. Ovchinnikov. Medical hydrogels based on bioactive substances. The synthesis, properties and possible use in preparation of bactericidal materials. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 74-86.
  • N.I. Kuzmin, A.V. Makarov, T.I. Podolskaya, E.A.Rogova. Rheological properties of concentrated solutions of HMW polyacrylonitrile in dimethyl sulfoxide. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 87-90.
  • Yu.A. Vinogradov, A.P. Neverov. Swelling of a fiber stream in spinning of chemical fibers. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 90-96.
  • Yu.A. Vinogradov, A.P. Neverov. Deformation analysis of the process of chemical fiber spinning. Khimicheskiye Volokna (Химические волокна) Journal 1 (2011) 96-102.

2010

  • N.N. Machalaba, A.V. Genis: Institute for synthetic fibre, Delovaya slava Rossiyi (Деловая слава России), 2010, №5 [28], 59-63
  • A.E. Baltser, V.M. Komarov, A.G.Bazanov, N.G. Zubritskaya, N.N. Machalaba: The influence of the main technological parameters during polimerization of tetrahydrofuran under the action of chloric acid,
    Khimicheskiye Volokna (Химические волокна) Journal, 2010, №4, 14-17
  • N.N. Machalaba: New light armor, Arsenal. Voyenno-promyshlennoye obozrenie (Арсенал. Военно-промышленное обозрение), 2010, №5 [23], 96-98
  • N.N. Machalaba. L.S. Solomonov: The production status of aramid and carbon fibres in Russia, Khimicheskiye Volokna (Химические волокна) Journal 1 (2009) 3-4.
  • A.V. Genis, G.N. Yakushenok, N.F. Konnova: Polyamide market - changing of priorities,  Plastics (Пластикс) 1-2 (71-72) (2009) 26-31, Samara/Russia.
  • N.N. Machalaba. V.D. Lunyov: Estimation of rheological characteristics requirements to polymer solution for production of high strength polyaramid yarns, Khimicheskiye Volokna (Химические волокна) Journal 5 (2009) 14-17.
  • A.V. Genis: Global and Russian trends of PET market, Plasticheskiye Massy (Пластические массы) Journal 7-8 (2009) 8-17.
  • Ye.A. Rogova, O.A. Roschina, T.I. Samsonova, A.V. Genis: Vapor phase chromatography determination of organic substances with different boiling point in  aquatic environment, Khimicheskiye Volokna (Химические волокна) Journal  6 (2009) 44-49.
  • V.A. Fomin, L.P. Korovin, L.N. Beloded, Yu.A. Kursky S.I. Shkurenko, Ye.V. Monahova, A.G. Petrov: Manufacturing researches of PLA - the basic polymer for biodegradable plastics, Plasticheskiye Massy (Пластические массы) Journal 12 (2009).
  • M.D. Antonova, P.N. Popov, N.Yu. Sochalina, S.I. Shkurenko, Ye.V. Monahova, N.V. Yefimova, S.G. Toropygin: The first clinical application of original antibacterial impregnated plastic material for functioning stump formation at enucleation, Topical questions of theoretical and applied medicine, 2009, Tver/Russia.
  • M.D. Antonova, P.N. Popov, S.I. Shkurenko, Ye.V. Monahova, N.V. Yefimova, S.G. Toropygin: A clinical case of application of new polyester implant at traumatic ptosis, Topical questions of theoretical and applied medicine, 2009, Tver/Russia.
  • V.I. Natrusov, T.Ye. Shatskaya, Ye.A. Beljaeva, A.B. Gilman, A.A. Kuznetsova, V.V. Usov, V.P. Galitsyn: Research of tensile elastic properties of UHMW PE based composite, Proceedings of the 29 th International Conference on industrial composites, June 1-5 2009 Yalta /Russia, Reports, Kiev, 2009 175-177..

2008

  • A.V. Genis, V.V. Usov: Status and prospects of development of the global and Russian market of polyamides, Plasticheskiye Massy (Пластические массы) Journal 7 (2008) 3-6.
  • A.V. Genis, V.V. Usov, R.K. Idiatulov: Multilayered sorption and filtering material, Patent for the invention RU 2317132, published 2008-02-20.
  • A.V. Genis, V.V. Usov, R.K. Idiatulov: Multi-layered sorption and filtering nonwoven material, Application for the invention RU 2330134, published 2008-07-27.
  • A.P. Andronova: Composition for high-temperature dyeing of the light-stabilized heat-resistant fibre, Patent application RU 2321695, published 2008-10-04.
  • L.Ye. Karpukhin, V.A. Skopintseva, P.M. Pakhomov. Studying of influence of polyconjugated С=С double bonds on the processes of acrylonitrile thermal transformations, Physics and chemistry of polymers: synthesis, properties and application: Collected papers of Tver State University, 14 (2008).
  • V.A. Skopintseva, L.E. Karpuhin, J.A. Emmanuilova, T.I. Samsonova: Quality estimation of PAN- yarn by deficiency parameter, The Al-Russian Conference on Chemical Analysis, Theses, Moscow: Klyazma, 2008
  • O.A. Roschina, Ye.A. Rogova, T.I. Samsonova: Definition of organic impurities by capillary gas chromatography in aquatic environment at synthetic fibres manufacture, The All-Russian Conference on Chemical Analysis, Theses, Moscow: Klyazma, 2008.
  • P. Pakhomov, S. Khizhnyak, V. Galytsyn, B. Hartmann, E. Moeller, V. Nikitin, V. Zakharov, A.E. Tshmel: Remote structural correlation in the sequence reactor powder-gel-fiber in polyethylenes, J. Macromolec. Sci.: Physics, Part B, V.47 № 6 (2008) 1096-1107. 

2007

  • A.V. Genis, V.V. Usov, V.N. Razboeva: Status of manufacture and use of polypropylene spun bond materials in Russia and abroad, Khimicheskiye Volokna (Химические волокна) Journal  1 (2007) 3-7.
  • A.V. Genis, V.V. Usov, R.K. Idiatulov: Device for making of sorption and filtering nonwoven materials from polymer solutions by aerodynamic spinning, Application for the useful model RU  62931, published 2007-05-10.
  • S.I. Shkurenko, Ye.V. Monahova, L.I. Slepyan, T.V. Bodyakova, A.I. Albulov, Ye.I. Smirnova, V.V. Usov: Surgical suture material (Variants), RU Patent 2309768, 2007
  • V.P. Galitsyn, M.V. Soboleva, O.A. Belousov, D.O. Fetisov, M.V. Slipenchuk: Method of production of high-strength UHMW polyethylene yarn, RU Patent 2334027, 2007-09-06.
  • P. Pakhomov, V. Galitsyn, S. Khizhnyak, A. Tshmel: The straight-chain segment length distribution in xerogels of UHMWPE, which provide high drawability of gel-derived fibers, J. Appl. Polymer Sci. 105 (2007) 2984-2990.
  • V. Galitsyn, M. Kakiage, H. Uehara, P. Pakhomov, E. Moeller, V. Nikitin, V. Zakharov, A. Tshmel: Straight-Chain Segment length distributions in UHMW PE reactor powders of different morphological types, Int. J. Polymer Anal. Charact. 12 2007 1-10.
  • V.K. Dudchenko, V.V. Gornostayev, E.A. Mayer, L.M. Reznikov, K.M. Kolkov, V.P. Galitsyn, Ye.M. Antipov, Yu.A. Lebedev, A.V. Rebrov, S.A. Kuptsov, P.M. Pakhomov, V.P. Galitsyn:  Deformation degree influence on the phase structure and mesomorphism propensity of UHMW PE in oriented fibres made by gel-spinning, Vysokomolekulyarnye soyedineniya (Высокомолекулярные соединения) Journal V. 49А  №6 (2007) 1003-1012.
  • Ye.A. Yegorov, V.V. Zhizhenkov, A.V. Savitsky, I.A. Gorshkova, S.D. Khizhnyak, I.V. Yakovlev, V.P. Galitsyn, P.M. Pakhomov: Oriented state of liquid softener in UHMW PE fibres, Physics and chemistry of polymers: synthesis, properties and application, Collected papers of Tver State University 13 (2007) 55-60.
  • P.M. Pakhomov, V.P. Galitsyn, I.V. Yakovlev, Yu.A.  Lebedev, S.D. Khizhnyak, Ye.M. Antipov: On structural and phase transitions in oriented gel-yarn of UHMW PE, Physics and chemistry of polymers: synthesis, properties and application, Collected papers of Tver State University 13 (2007) 17-30.

2006

  • A.P. Andronova: The dyed chemical fibre for protection of paper against falsification, Patent RU 59077, published 2006-10-12.
  • Yu.A. Vinogradov: On stretching of viscoelastic polymer systems, Physics and chemistry of polymers: synthesis, properties and application, Collected papers of Tver State University 12 (2006) 158.
  • Yu.A. Vinogradov: Features of generalization of viscoelastic properties of polymeric systems at pressing them through a capillary, Physics and chemistry of polymers: synthesis, properties and application, Collected papers of Tver State University 12 (2006) 58.
  • Ya.A. Vinogradov: Viscoelastic flow of polymer systems through a round section capillary. Rheological analysis, Khimicheskiye Volokna (Химические волокна) Journal 1 (2006) 3-6.
  • Yu.A.Vinogradov: Viscoelastic flow of polymer systems through a round section capillary. Deformation analysis. Khimicheskiye Volokna (Химические волокна) Journal 2 (2006) 39 - 42.
  • Yu.A. Vinogradov: Viscoelastic flow of polymer systems through a round section capillary. Kinematic analysis. Khimicheskiye Volokna (Химические волокна) Journal 3 (2006) 26-30.
  • V.I. Isayeva: Technological features of polyolefine monofilaments production, Khimicheskiye Volokna (Химические волокна) Journal 4 (2006) 18-27.
  • P.M. Pakhomov, A.Yu. Golikova, S.D.Khizhnyak, V.P.Galitsyn, S.A.Gribanov, S.A.Kuptsov: On structure of high-strength UHMW PE fibres made by gel-spinning, Khimicheskiye Volokna (Химические волокна) Journal 3 (2006) 18.
  • P.M. Pakhomov, S.D. Khizhnyak, A.Yu. Golikova, V.P. Galitsyn: Structural determination of elastic strength properties of polyethylene fibres made by gel-spinning, The 16th International Conference: physics of durability and plasticity, June 26-29, 2006, Theses p.60 Samara/Russia.
  • V.P. Galitsyn, D.B. Stogov, I.V. Yakovlev, P.M. Pakhomov: The deformation components contribution into increase of the longitudinal size of polyethylene gel-yarn, Physics and chemistry of polymers: synthesis, properties and application, Collected papers of Tver State University 12 (2006) 164-169.
  • P.M. Pakhomov, V.P. Galitsyn, S.D. Khizhnjak, I.V. Yakovlev, S.A. Gribanov, A.Ye. Tshmel: The structure of ultra highly oriented PE fibres made by gel-spinning, Physics and chemistry of polymers: synthesis, properties and application, Collected papers of Tver State University 12 (2006) 23-29.